2423 Old Middlefield Way Suite E 
Mountain View, California 94043 

Phone: (650) 965-2255
Fax: (650) 965-2225


HomeAbout Skyline Test EquipmentSkyline ProductsDirections to SkylineDownload Skyline SoftwareSend email to Skyline

 
 
 
 
- PC-HOST REVISION HISTORY -


----------- -------------------------------------------------------------------
File        Version 3.49                                           June 4, 2001
----------- -------------------------------------------------------------------
Q.EXE       Updated for SKYptg revision 1
Q.EXE       Launches monitor front panel, sets lines=50 for Skyline Front Panel
Q.LIB       Launches monitor front panel, sets lines=50 for Skyline Front Panel
PAT62.EXE   Handles up to 32,000 vectors
----------- -------------------------------------------------------------------
File        Version 3.48                                         March 12, 2001
----------- -------------------------------------------------------------------
Q.EXE       Eliminated FUNTEST TESTSUPPLY false passes, fixed MEASURE & QSCHMOO
TIME.BIN    Added FUNTEST EXQ TESTSUPPLY, SETCHANNEL IV1
----------- -------------------------------------------------------------------
File        Version 3.47                                      February 28, 2001
----------- -------------------------------------------------------------------
Q.EXE       Added settling time to SKYpem FUNTEST TESTSUPPLY and ONLYTESTSUPPLY
Q.EXE       MEASURE FUNTEST ONLYTESTSUPPLY does not display failing pin number
Q.EXE       OFFSET command reads SRC PROM's when using SKYptg
Q.EXE       Accepts TRULES OFF,ON,OVERRIDE from the keyboard
Q.LIB       Changed copyright year to 2001
HPT.BIN     Improved user interface
----------- -------------------------------------------------------------------
File        Version 3.46                                       November 8, 2000
----------- -------------------------------------------------------------------
Q.EXE       POB caches old patterns with SKYpem
Q.EXE       POBDELETE command supported on SKYpem
Q.EXE       RESETERROR command now working
Q.EXE       Reset initializes SKYpem,SKY284 type table
PLOAD.BIN   Updated for SKYpem POB
----------- -------------------------------------------------------------------
File        Version 3.45                                       October 28, 2000
----------- -------------------------------------------------------------------
Q.EXE       XDISPLAY PATTERN working with SKYpem
Q.EXE       XDISPLAY TYPE shows inhibit enable and early exit settings
Q.EXE       POBDIRECTORY,POBSELFCHECK commands supported on SKYpem
Q.EXE       Inhibit enable (type table byte 4) working with SKYpem and SKY284
Q.EXE       Aborting macro no longer turns off panel
Q.LIB       Added T macro
RPM.BIN     Removed R number
TIME.BIN    Updated messages
PLOAD.BIN   Initializes SKYpem type table
PAT62.EXE   Updated help message to include /b and /o options
----------- -------------------------------------------------------------------
File        Version 3.44                                         April 17, 2000
----------- -------------------------------------------------------------------
Q.EXE       Initializes SKYHIGH current limit ports
Q.LIB       Changed copyright year to 2000
----------- -------------------------------------------------------------------
File        Version 3.43                                      December 11, 1999
----------- -------------------------------------------------------------------
Q.EXE       MODEL shows SHYHIGH
Q.EXE       Improved SKYHIGH ID port initialization
Q.EXE       PRINT STATUS shows all bits of PS1 and PS2 ID
ESC.EXE     Updated for SKYHIGH board
GPIB.BIN    Handles negative numbers correctly
62TSC.BIN   Q2/62 Self Check 1 & 2, New File, Requires CSC40 Load Board
62TSC.OBJ   Q2/62 Self Check 1 & 2, New File, Requires CSC40 Load Board
62TSC.SYM   Q2/62 Self Check 1 & 2, New File, Requires CSC40 Load Board
62TSC1.BIN  Increased test 423 current limit to 15 nanoamps from 10 nanoamps
62TSC2.BIN  No longer leaves PEM in a goofed up state
INSTALL.EXE Updated for 62TSC
----------- -------------------------------------------------------------------
File        Version 3.42                                        October 4, 1999
----------- -------------------------------------------------------------------
Q.EXE       Initializes SKYHIGH ID port
Q.EXE       I2 & I3 MEASURE limit increased to 400ma from 300ma for Q2 & Q8000
----------- -------------------------------------------------------------------
File        Version 3.41                                     September 20, 1999
----------- -------------------------------------------------------------------
Q.EXE       Supports SKYHIGH Board
Q.EXE       Displays VIL1,VIL2 correctly on Q8000
62TSC2.BIN  Corrected test limits for tests 983,984,986
----------- -------------------------------------------------------------------
File        Version 3.40                                          June 25, 1999
----------- -------------------------------------------------------------------
Q.EXE       TURBO default changed to 20000 from 18000
----------- -------------------------------------------------------------------
File        Version 3.39                                          June 18, 1999
----------- -------------------------------------------------------------------
Q.EXE       SKYpem power on reset problem corrected
Q.EXE       TURBO n adds n microseconds to SETTIME, not to FUNTEST
----------- -------------------------------------------------------------------
File        Version 3.38                                           May 10, 1999
----------- -------------------------------------------------------------------
Q.EXE       TURBO n adds n microseconds to FUNTEST, TURBO displays turbo time
----------- -------------------------------------------------------------------
File        Version 3.37                                            May 5, 1999
----------- -------------------------------------------------------------------
Q.EXE       SKYpem BEGIN does not set type table
----------- -------------------------------------------------------------------
File        Version 3.36                                            May 1, 1999
----------- -------------------------------------------------------------------
Q.EXE       Supports narrow patterns on SKYpem
62TSC1.BIN  Increased settling time for test 351
----------- -------------------------------------------------------------------
File        Version 3.35                                       January 15, 1999
----------- -------------------------------------------------------------------
Q.LIB       Changed copyright year to 1999
CCL.EXE     Removed "XIN Q 0 12 0 0 FF E" after TEST
ESC.EXE     Runs longer
GPIB.BIN    GPIB board test program, new file
GPIB.SYM    GPIB board test symbols, new file
62TSC1.BIN  Added 200US settling time to test 731 for NE527 comparators
284OFF.BIN  Checks for offset between MINO and MAXO, default -1000 and 4000
----------- -------------------------------------------------------------------
File        Version 3.34                                      December 22, 1998
----------- -------------------------------------------------------------------
Q.EXE       Increased Delay for Security Key
----------- -------------------------------------------------------------------
File        Version 3.33                                      October 28, 1998
----------- -------------------------------------------------------------------
Q.EXE       Faster PLOAD
----------- -------------------------------------------------------------------
File        Version 3.32                                      September 1, 1998
----------- -------------------------------------------------------------------
Q.EXE       Disconnects pins from PTU at end of test
----------- -------------------------------------------------------------------
File        Version 3.30                                          June 17, 1998
----------- -------------------------------------------------------------------
Q.EXE       Supports PC62 addresses CC000 & DC000
62TSC3.BIN  Increased settling time for V3 to 100 ms. from 50 ms.
----------- -------------------------------------------------------------------
File        Version 3.29                                         April 24, 1998
----------- -------------------------------------------------------------------
Q.EXE       Added 1.5 ms. delay at end of SETTIME
QTL.EXE     Maximum PAUSE time increased to 2147.4 ms. from 25.5 ms.
62TSC3.BIN  Increased settling time for V3 to 50 ms. from 25 ms.
----------- -------------------------------------------------------------------
File        Version 3.28                                         March 30, 1998
----------- -------------------------------------------------------------------
Q.EXE       MEASURE IPAR handles negative values corectly
62TSC3.BIN  Q2/62 Self Check 3, New File, Requires Self Check 3 Load Board
62TSC3.OBJ  Q2/62 Self Check 3, New File, Requires Self Check 3 Load Board
62TSC3.SYM  Q2/62 Self Check 3, New File, Requires Self Check 3 Load Board
INSTALL.EXE Updated for 62TSC3
----------- -------------------------------------------------------------------
File        Version 3.27                                          March 9, 1998
----------- -------------------------------------------------------------------
Q.EXE       Updated for SKYpem, Skyline Pattern Execution Module
Q.EXE       Updated for Sytest Hi-Current Power Supply 2 Board
Q.EXE       Executes GOODBYE macro upon exit
Q.LIB       Added default GOODBYE macro
ESC.EXE     Updated for Sytest Hi-Current Power Supply 2 Board
QTL.EXE     Generates error message for zero length PGM list
PAT62.EXE   Handles up to 256 F D M and I bits
PLOAD.BIN   Tests all 512K vectors of SKYpem
CAL62.BIN   Handles failed BSEARCH more gracefully
62TSC1.BIN  FAST=1 skips tests 16,421,422,423
62TSC1.BIN  Updated for Sytest Hi-Current Power Supply 2 Board
62TSC2.BIN  Updated for new version of 62TSC2B
62TSC1A.OBJ New and improved version
62TSC1E.OBJ New and improved version
62TSC2B.OBJ New and improved version
----------- -------------------------------------------------------------------
File        Version 3.26                                      February 10, 1998
----------- -------------------------------------------------------------------
Q.EXE       Updated for SKYpem, Skyline Pattern Execution Module
Q.LIB       Changed copyright year to 1998
QTL.EXE     Works with files having more than 32767 lines
QTL52.EXE   Works with files having more than 32767 lines
QTL62.EXE   Works with files having more than 32767 lines
62TSC1.BIN  Increased settling time for tests 401 and 411
62TSC1.BIN  Updated for SKYpem, Skyline Pattern Execution Module
62TSC2.BIN  Updated for SKYpem, Skyline Pattern Execution Module
62TSC1A.OBJ New and improved version
62TSC1B.OBJ New and improved version
62TSC1C.OBJ New and improved version
62TSC1E.OBJ New and improved version
----------- -------------------------------------------------------------------
File        Version 3.25                                      November 10, 1997
----------- -------------------------------------------------------------------
Q.EXE       Updated for SKYptg, Skyline Programmable Timing Generator
ESC.EXE     Updated for SKYptg, Skyline Programmable Timing Generator
Q2CAL.LIB   HPTEST,GTTEST sets CSC40 load board ID
62TSC1.BIN  Updated for SKYptg, Skyline Programmable Timing Generator
62TSC2.BIN  Updated for SKYptg, Skyline Programmable Timing Generator
----------- -------------------------------------------------------------------
File        Version 3.24                                          July 25, 1997
----------- -------------------------------------------------------------------
Q.EXE       Changed MEASURE limit on IV1 to 799 milliamps from 600 milliamps
Q.EXE       Supports PC62 addresses CC000 & DC000, does not support POB board
ESC.EXE     Fixed POB test that failed on some PCI bus computers
POB.EXE     Supports PC62 memory mapped I/O at addresses CC000 and DC000
62TSC2.BIN  Changed limit on test 982 to 610 milliamps from 590 milliamps
----------- -------------------------------------------------------------------
File        Version 3.23                                          June 24, 1997
----------- -------------------------------------------------------------------
Q.EXE       Added 3 microsecond delay after writing address to power supply DAC
----------- -------------------------------------------------------------------
File        Version 3.22                                          June 19, 1997
----------- -------------------------------------------------------------------
Q.EXE       ESCape PTG calibration problems fixed
Q.EXE       Last pin in SCRAMBLE table no longer ignored with HEADER BIG or NEW
QTL.EXE     SRCREAD works with HEADER NEW,BIG - must be in first 255 registers
QTL52.EXE   Handles arrays
52TSC2.BIN  Increased settling time for tests 401 and 411
----------- -------------------------------------------------------------------
File        Version 3.21                                            May 8, 1997
----------- -------------------------------------------------------------------
Q.EXE       Fixed problem with Q2 ESCape TIMES,TDUMP,FDUMP commands
QTL52.EXE   Works on Windows NT
----------- -------------------------------------------------------------------
File        Version 3.20                                          April 4, 1997
----------- -------------------------------------------------------------------
QTL.EXE     Corrected problem with SETUP,RUN,PLOAD sequence, broken in 3.00
----------- -------------------------------------------------------------------
File        Version 3.19                                          March 6, 1997
----------- -------------------------------------------------------------------
Q.EXE       284VER works on GT200 and HP5370 counters
Q.EXE       Recognizes 512K and 1M Vector Generator Modules
Q.EXE       Q2/62 ESCape calibration and verification now working
ESC.EXE     Works with CSC84 load board
CSC40.BIN   Improved relay tests and test numbering
284CAL.BIN  Does not set VERIFY to 1 after first run
284OFF.BIN  Fails if any pin fails
284TSC.BIN  Resets load board before using it
284VER.BIN  Works on GT200 and HP5370 counters
52TSC4.BIN  Tests 985,986 work correctly on old controller, bad since 2.42
----------- -------------------------------------------------------------------
File        Version 3.18                                       January 28, 1997
----------- -------------------------------------------------------------------
Q.LIB       Added 284VER macro, 284CAL and 284OFF create list file
Q.EXE       Supports HP 5370 and Wave 2070 Counters using Skyline GPIB board
Q.EXE       COUNTER in expression has float value in nanoseconds
QTL.EXE     COUNTER in expression has float value in nanoseconds
284CAL.BIN  Improved accuracy of driver 1 stop edge
284CAL.BIN  Adjusted CDM PES search limits
284TSC.BIN  Increased 701,711,721,731 to 80 millivolts from 40 millivolts
284TSC.BIN  Flushes pipeline latches before test 570
284VER.BIN  SKY284 timing verification program, new file
284VER.OBJ  SKY284 timing verification pattern, new file
284VER.SYM  SKY284 timing verification symbols, new file
PCHOST.CAL  SKY284 default calibration data, new file
----------- -------------------------------------------------------------------
File        Version 3.17                                       January 14, 1997
----------- -------------------------------------------------------------------
Q.EXE       Messages may end in 80 instead of 0
----------- -------------------------------------------------------------------
File        Version 3.16                                        January 3, 1997
----------- -------------------------------------------------------------------
Q.LIB       Changed copyright year to 1997
Q.EXE       AUTOSTART status may be accessed in Q
Q.EXE       SUSPEND command executes test program
QTL.EXE     Remote SENDPGM works above 64K, PGMLIST labels are type 9, were 2
----------- -------------------------------------------------------------------
File        Version 3.15                                      December 16, 1996
----------- -------------------------------------------------------------------
Q.EXE       BSEARCH bug fixed when result is within epsilon of mid-point
Q.EXE       Supports up to 256K of QTL when using HEADER BIG
Q.EXE       Supports up to 64K sequence blocks when using HEADER BIG
QTL.EXE     Supports up to 256K of QTL when using HEADER BIG
QTL.EXE     Supports up to 64K sequence blocks when using HEADER BIG
----------- -------------------------------------------------------------------
File        Version 3.14                                       October 28, 1996
----------- -------------------------------------------------------------------
Q.LIB       Added 284CAL, 284OFF, 284TSC macros
Q.EXE       OPEN command opens DAT or LST file for reading
Q.EXE       INPUT command reads from DAT or LST file
QTL.EXE     OPEN command opens DAT or LST file for reading
QTL.EXE     INPUT command reads from DAT or LST file
284TSC.BIN  Added comparator voltage accuracy tests
----------- -------------------------------------------------------------------
File        Version 3.13                                       October 11, 1996
----------- -------------------------------------------------------------------
Q.EXE       SETCHANNEL works correctly with multiple entries for one supply
Q.EXE       ENDTEST does not connect driver to PTUCONNECT pins
----------- -------------------------------------------------------------------
File        Version 3.12                                        October 4, 1996
----------- -------------------------------------------------------------------
Q.EXE       Improved PARCAL accuracy
Q.EXE       Turns on cursor when shelling to DOS
----------- -------------------------------------------------------------------
File        Version 3.11                                     September 12, 1996
----------- -------------------------------------------------------------------
QTL.EXE     Corrected problems with references to test block labels above 32K
QTL52.EXE   Symbol table expanded to 16384 from 1024
----------- -------------------------------------------------------------------
File        Version 3.10                                      September 9, 1996
----------- -------------------------------------------------------------------
Q.EXE       Keyboard AE,OHC,OHH,OHR,PD,PE,PS,SOE working, was broken in 3.03
Q.EXE       Detects and corrects IACC75 for slow time of day clocks
Q.EXE       Detail print out shows correct test number
Q.EXE       Updated for revision 1 VG84 board
Q.EXE       Supports up to 16384 registers when using HEADER NEW
QTL.EXE     Supports up to 16384 registers when using HEADER NEW
ABT.QTL     Example test program for the SKY284
ABTPAT.QTL  Example pattern file for the SKY284
284CAL.BIN  Now does drive, strobe and clock distribution calibration
284OFF.BIN  Summary shows failing pins, adjusted search limits
284TSC.BIN  Updated for CSC84 load board
----------- -------------------------------------------------------------------
File        Version 3.09                                          July 29, 1996
----------- -------------------------------------------------------------------
Q.EXE       Detects and corrects for slow time of day clocks
62TSC2.BIN  LED test no longer hangs, was broken in 3.08
----------- -------------------------------------------------------------------
File        Version 3.08                                          July 12, 1996
----------- -------------------------------------------------------------------
Q.EXE       Updated for revision 3 TGM modules
Q.EXE       Does not execute STARTTEST command in opens halt mode
Q.EXE       Corrected erroneous processing of labels in message commands
62TSC2.BIN  Increased LED test to 5 seconds from 2.5 seconds
240TSC.BIN  CSC40 version of 284TSC.BIN, binary, new file
240TSC.SYM  CSC40 version of 284TSC.SYM, symbol, new file
----------- -------------------------------------------------------------------
File        Version 3.07                                          June 16, 1996
----------- -------------------------------------------------------------------
Q.EXE       Corrected problem with loading of hexadecimal files
Q.EXE       Missing ESC[r agruments default to reasonable values
Q.EXE       Corrected erroneous binning problems
Q.EXE       Corrected erroneous processing of labels in message commands
----------- -------------------------------------------------------------------
File        Version 3.06                                           May 24, 1996
----------- -------------------------------------------------------------------
Q.EXE       Expanded front panel
QTL.EXE     DOUBLEWORD,FLOAT registers 234 and above correctly allocated
CSC40.EXE   Updated for 4 digit test numbers
PAT62.EXE   Does not put PEMDEF's into symbol table when using -b
PAT62.EXE   Increased symbol table size to 1024 from 256
284TSC.BIN  Increases leakage test settling time required for 84 pins
----------- -------------------------------------------------------------------
File        Version 3.05                                           May 14, 1996
----------- -------------------------------------------------------------------
Q.EXE       PAT62,QTL,QTL52,QTL62 accept options with / or -
Q.EXE       LOCK,LOCKX no longer lock out handler/prober port
Q.EXE       DOS commands no longer create temporary file \PCHOST\PCHOST.TMP
Q.EXE       HELP command now build in
Q.EXE       Divide by 0 handled more gracefully
HPT.BIN     Handler/prober port test binary, requires unreleased fixture
HPT.SYM     Handler/prober port test symbol table
HELP.EXE    No longer included
62TSC2.BIN  Added second line to summary messages
----------- -------------------------------------------------------------------
File        Version 3.04                                            May 6, 1996
----------- -------------------------------------------------------------------
Q.EXE       Added XINSERT PET, XDISPLAY PET commands
QTL.EXE     USEDCHANNEL list has actual number of pins when using HEADER NEW
HELP.EXE    Added XINSERT PET, XDISPLAY PET commands
HELP.EXE    Added 284TSC test numbers for 256K vectors
284CAL.BIN  Updated for revision 2 VGM
284CAL.OBJ  Updated for revision 2 VGM
284OFF.BIN  Updated for revision 2 VGM, expanded to 80 pins
284OFF.OBJ  Updated for revision 2 VGM, expanded to 80 pins
284TSC.BIN  Updated for revision 2 VGM
284TSC.OBJ  Updated for revision 2 VGM
----------- -------------------------------------------------------------------
File        Version 3.03                                         April 11, 1996
----------- -------------------------------------------------------------------
Q.EXE       Fixed opens halt continue
Q.EXE       No longer requires ANSI.SYS
Q.EXE       Fixed SKY284 PTUCONNECT PTU command
Q.EXE       Improved power supply settling times
Q.EXE       Only MODE CON LINES=25,43,50 accepted
Q.EXE       Added LINES 25,43,50 and LINES=25,43,50 commands
ESC.EXE     No longer requires ANSI.SYS
S15.EXE     Many improvements
SRTE.EXE    Many improvements
PAT62.EXE   Handles up to 16000 vectors
62TSC2.BIN  Added sequence and binning table for load board 1
62TSC2.BIN  Added LED and PTG O.S. checksum tests
284OFF.BIN  SKY284 offset calibration program, new file
284OFF.OBJ  SKY284 offset calibration pattern, new file
284OFF.SYM  SKY284 offset calibration symbols, new file
----------- -------------------------------------------------------------------
File        Version 3.02                                      February 16, 1996
----------- -------------------------------------------------------------------
Q.EXE       Corrected security violation problem with regular PC-Host
Q.EXE       Improved serial interface driver
S15.EXE     Many improvements
HELP.EXE    Added 284TSC test 425
284TSC.BIN  Added test 425, IACC10 one pin at a time
----------- -------------------------------------------------------------------
File        Version 3.01                                       January 27, 1996
----------- -------------------------------------------------------------------
Q.EXE       CASE works with negative register value
Q.EXE       ESC key may be used to exit ready block
Q.EXE       Corrected problem with IBINn in expressions
Q.EXE       STE et. al. initialize stack if executed at begining of a test
Q.EXE       QSCHMOO,BSEARCH,LSEARCH,STARTn,STOPn work for 84 timing generators
S15.EXE     S15 vector conversion program, new file
284CAL.BIN  SKY284 calibration program, new file
284CAL.OBJ  SKY284 calibration pattern, new file
284CAL.SYM  SKY284 calibration symbols, new file
----------- -------------------------------------------------------------------
File        Version 3.00                                       January 17, 1996
----------- -------------------------------------------------------------------
Q.EXE       Uses extended memory to reduce main memory use
Q.EXE       Supports up to 4096 registers when using HEADER NEW
Q.EXE       National Instruments GPIB boards no longer supported
Q.EXE       Updated for revision 2 PE84 board
Q.EXE       Updated for revision 1 TG84 board
Q.EXE       Added TP1=ERROR command
Q.EXE       Added TESTNUMBER word register command
Q.EXE       Searches no longer change word register 253
Q.EXE       CALL stack increased to 16 from 15
Q.LIB       Changed copyright year to 1996
QTL.EXE     Supports up to 4096 registers when using HEADER NEW
QTL.EXE     Added TESTNUMBER word register command
QTL.EXE     Supports RUN,SETUP,ADDCOM with addreses > 64K
QTL.EXE     Supports RUN,SETUP with literal addresses
HELP.EXE    Added TP1=ERROR to TG84 help
284TSC.BIN  Updated for revision 2 PE84 board
284TSC.BIN  Updated for revision 1 TG84 board
----------- -------------------------------------------------------------------
File        Version 2.47                                       December 8, 1995
----------- -------------------------------------------------------------------
Q.EXE       Corrected IB command's UART initialization
Q.EXE       Longer delay when reading UART's and PROM's
Q.EXE       HEADER NEW enables USEDCHANNEL,SCRAMBLE,PINLIST for 84 pins
Q.EXE       Fixed LOAD REPAIR for addresses above 127
Q.EXE       Added QTL,QTL52,QTL62,PAT62,SRTE commands
Q.EXE       Improved processing of control C
Q.EXE       Corrected MEASURE IRAIL
QTL.EXE     Corrected I1,I2 limits for SKY284
QTL.EXE     INPUT STRING.N, PRINT STRING.N do only one character
QTL.EXE     Uses extended memory to reduce main memory use
QTL52.EXE   Uses extended memory to reduce main memory use
QTL62.EXE   Uses extended memory to reduce main memory use
52MUX.LIB   Changed 62DVER, 62DVST, 62MVER display numbers to green from red
52REG.LIB   Changed 62DVER, 62DVST, 62MVER display numbers to green from red
52TSC5.BIN  Deleted test 401
----------- -------------------------------------------------------------------
File        Version 2.44                                       October 24, 1995
----------- -------------------------------------------------------------------
Q.EXE       Corrected programming of VIH1,VIH2 from QTL on SKY284
Q.EXE       LOAD REPAIR now working with ESCape
QTL.EXE     HEADER NEW enables USEDCHANNEL,SCRAMBLE,PINLIST for 84 pins
QTL.EXE     Updated voltage ranges for SKY284
QTL.EXE     IV3 accepts positive numbers
IBT.BIN     Added mode change time outs
HELP.EXE    Added help for SENDWORD command
HELP.EXE    Added help for SKY284 logic test system
SRTE.EXE    Signal Routing Table Editor, new program
PAT62.EXE   Uses extended memory to reduce main memory use
52TSC5.BIN  Added sequence and binning table for load board ID AD
INSTALL.EXE Makes IBT.OBJ
----------- -------------------------------------------------------------------
File        Version 2.43                                     September 22, 1995
----------- -------------------------------------------------------------------
Q.EXE       S/LOG works with ESCape
52TSC3.BIN  Added sequence and binning table for load board ID AD
----------- -------------------------------------------------------------------
File        Version 2.42                                        August 28, 1995
----------- -------------------------------------------------------------------
Q.EXE       PARCAL failures show correct pins
Q.EXE       Correct failing pins shown when used channel list has holes
QTL.EXE     Supports PLOAD addresses above 64K
QTL.EXE     Supports BSEARCH,LSEARCH for 84 timing generators
ESC.EXE     Updated to recognize revision 4C and revision 5 hardware
PAT62.EXE   Supports up to 336 pattern data bits
52TSC4.BIN  Corrected test limits for tests 981-986
----------- -------------------------------------------------------------------
File        Version 2.41                                           June 1, 1995
----------- -------------------------------------------------------------------
Q.EXE       DOSUMMARY inside subroutine works correctly
62MXSC.BIN  Q2/62 MUX load board selfcheck, binary, new file
62MXSC.SYM  Q2/62 MUX load board selfcheck, symbol table, new file
INSTALL.EXE Makes 62MXSC.OBJ from 62MXSC.BIN
----------- -------------------------------------------------------------------
File        Version 2.40                                           May 19, 1995
----------- -------------------------------------------------------------------
Q.EXE       LSEARCH,BSEARCH TGn work from keyboard
Q.EXE       Fixed problems with QTL BSEARCH and LSEARCH
Q.EXE       DOS command outputs to screen, not to a file
Q.EXE       DOSUMMARY writes to DAT file after PARAM SUMMARY
Q.EXE       Serial port parity and stop bit read from interface board switch
----------- -------------------------------------------------------------------
File        Version 2.38                                           May 15, 1995
----------- -------------------------------------------------------------------
Q.EXE       Fixed problems with IV1,IV2,IV3 entry & display on old controller
Q.EXE       A: command no longer generates "File not found ..." message
Q.EXE       GETBYTE time out increased to 2 seconds from 1 second
Q.EXE       Less overlays for faster calibration and verification
Q.EXE       Added support for floating point and arrays, ESCape only
Q.EXE       Added EMULATE WPORT,AUXPORT commands, ESCape only
QTL.EXE     BSEARCH VOL and LSEARCH VOL now search VOL not VOUT
QTL.EXE     FLOAT declares floating point register, uses a doubleword register
QTL.EXE     Expressions may contain floating point numbers and registers
QTL.EXE     Supports array declaration and use with A[...] syntax
ESC.EXE     Updated for revision 4B ESC board
IBT.BIN     Interface board test binary, requires unreleased lookback fixture
IBT.SYM     Interface board test symbol table
IBT.REF     Interface board test reference file
HELP.EXE    Added EMULATE command
TIME.BIN    Improved accuracy
SPEED.BIN   Added load board ID 1
52TSC4.BIN  Corrected IV1 value in test 954
----------- -------------------------------------------------------------------
File        Version 2.37                                         March 10, 1995
----------- -------------------------------------------------------------------
Q.EXE       CYCLE=n.n works correctly
TIME.BIN    Does FUNTEST EXQ on Q2/62
----------- -------------------------------------------------------------------
File        Version 2.36                                      February 27, 1995
----------- -------------------------------------------------------------------
Q.EXE       ESCape reset enables power supplies
Q.EXE       No longer accepts DOS FORMAT command
Q.EXE       Several minor bugs in keyboard voltage commands fixed
Q.EXE       New ESCape SETCHANNEL algorithm has less channel to channel skew
Q.EXE       QSCHMOO CYCLE, BSEARCH CYCLE, LSEARCH CYCLE now working on ESCape
Q.EXE       QSCHMOO accepts I1,I2,I3 as Y parameters in place of IV1,IV2,IV3
Q.EXE       Unexpected keystrokes don't cause ESCape "executing else" messages
HELP.EXE    Removed DOS FORMAT command
PAT62.EXE   Accepts D0-D99, D1-D26 are the same as DA-DZ
PAT62.EXE   Accepts M0-M99, M1-M26 are the same as MA-MZ
PAT62.EXE   SETFC 256*N+1 generates SETF for last vector not SETFC, for N>=1
----------- -------------------------------------------------------------------
File        Version 2.35                                       January 30, 1995
----------- -------------------------------------------------------------------
Q.EXE       SYMBOL command no longer deletes Q variables
Q.EXE       More symbol table functions overlaid to save memory
Q.LIB       Changed copyright year to 1995
ESC.EXE     Updated for revision 4A ESC board
HELP.EXE    Corrected typos in PEM, PGM and PTG help
CSC40.BIN   Corrected tests 301-340
----------- -------------------------------------------------------------------
File        Version 2.34                                      December 15, 1994
----------- -------------------------------------------------------------------
ESC.EXE     Updated for revision 4 ESC board
----------- -------------------------------------------------------------------
File        Version 2.33                                       December 6, 1994
----------- -------------------------------------------------------------------
QTL.EXE     QINSERT changed length to little Indian from big Indian
----------- -------------------------------------------------------------------
File        Version 2.32                                       October 17, 1994
----------- -------------------------------------------------------------------
Q.EXE       CLS and CLEAR turn off panel display
Q.EXE       Added DRIVERTOL and STROBETOL commands
Q.EXE       DOS command now accepts 5 arguments, was 4
Q.EXE       ESC PARCAL displays correct pin numbers on pin error lights
Q.EXE       Output from commands shelled to DOS stays in the scroll window
HELP.EXE    No longer does "--more--", it is done by Q
HELP.EXE    Added DRIVERTOL, STROBETOL, SENDBYTE, GETBYTE, 62CSC
52CAL.LIB   Changed 52DVER, 52DVST, 52MVER display numbers to green from red
HEXBIN.EXE  Does not give address errors when processing 16 bit data
----------- -------------------------------------------------------------------
File        Version 2.31                                     September 26, 1994
----------- -------------------------------------------------------------------
52CAL.LIB   52OFST accuracy improved when using GT200 counter
----------- -------------------------------------------------------------------
File        Version 2.30                                     September 16, 1994
----------- -------------------------------------------------------------------
Q.EXE       Ignores null characters in command line
Q.EXE       Eliminated ESC BSEARCH "No Pass/Fail Point Found" message
CCL.EXE     Does "XIN Q 0 12 0 0 FF E" after TEST
Q2CAL.LIB   GT200 probe calibration done with 399 nanosecond cycle, was 100 ns.
----------- -------------------------------------------------------------------
File        Version 2.29                                     September 10, 1994
----------- -------------------------------------------------------------------
Q.EXE       Switches to selected serial port even if that port is not found
CCL.EXE     ADJUST POTxxx causes pot to blink
CCL.EXE     ADJUST POTxxx ... STROBE ... does BSEARCH
CCL.EXE     ADJUST command has improved appearance
CCL.EXE     Sets ENHANCED variable to 1000 rather than to 1
CCL.EXE     DRIVERTOL and STROBETOL default to 1000 picoseconds
CCL.EXE     DRIVERTOL and STROBETOL accept value in nanoseconds not picoseconds
----------- -------------------------------------------------------------------
File        Version 2.28                                      September 6, 1994
----------- -------------------------------------------------------------------
Q.EXE       ESC MATCH command now working correctly
Q.EXE       ESC Breakpoint table increased to 100 entries from 50 entries
Q.EXE       ESC allows breakpoint to be modified when table is full
Q.EXE       Row and column repair data written to DAT file in correct format
Q.LIB       52TSC123 and 52TSC macros no longer set offsets
----------- -------------------------------------------------------------------
File        Version 2.27                                         August 8, 1994
----------- -------------------------------------------------------------------
Q.EXE       Ignores garbage at end of prompt when read from Q.SET
Q.EXE       CLS turns cursor on and shift off
Q.EXE       Added error messages for ESC PTG time out and reduced time out
Q.EXE       Added keyboard SENDBYTE and GETBYTE commands
Q.EXE       Fixed ESC commands that display IV1,IV2,IV3,VOL,VPAR
Q.EXE       Counter code no longer overlaid, was overlaid in version 2.22
Q.OLD       Counter code no longer overlaid, was overlaid in version 2.24
62MUX.LIB   62PELX,62DVER use correct CSC40 delays when using 62CSC library
62REG.LIB   62DVER uses CAP62 pattern, not PEMBIT commands
62REG.LIB   62DVER works with CSC40, only one probe to move
62REG.LIB   62DVST works with CSC40, only one probe to move
----------- -------------------------------------------------------------------
File        Version 2.26                                          July 22, 1994
----------- -------------------------------------------------------------------
Q.EXE       ESC PRINT S etc. does not turn on ready light
Q.EXE       GT200 ESC PTG calibration no longer has the slows
Q.EXE       ESC BSEARCH improved resolution to 1 count from 2 counts
Q.EXE       Self check macros report correct test number when used with ESC
Q.EXE       ESC QSCHMOO fixed when plot resolution < power supply resolution
DCCAL.BIN   Works with CSC40 and CAL MUX load boards
----------- -------------------------------------------------------------------
File        Version 2.25                                          July 18, 1994
----------- -------------------------------------------------------------------
Q.EXE       Increased ESC settling time for VPAR to 800 microseconds from 500
Q.EXE       Increased ESC IV1,IV2,IV3 delay to 3000 microseconds from 1975
Q.EXE       ESC reset error signal guaranteed to be 20 microseconds wide
Q.EXE       ESC PRINT S etc. does not turn on ready light while looping
Q.EXE       ESC PRINT DETAIL prints after PASS STOP
Q.EXE       Includes new small GT200 driver
Q.OLD       Reduced size from 295K to 270K by using new small GT200 driver
Q.200       No longer available, use Q.EXE
Q.LIB       62CSC command uses TTL not ECL levels
52TSC1.BIN  Increased delay in test 66
52TSC3.BIN  Increased delay in test 404 to 2 milliseconds from 1 millisecond
----------- -------------------------------------------------------------------
File        Version 2.24                                           July 6, 1994
----------- -------------------------------------------------------------------
Q.EXE       Fixed ESC keyboard voltage and current assignment commands
Q.EXE       ESC does * before TSEARCH and BSEARCH from keyboard
Q.EXE       Stops searching for label at end of batch file
Q.EXE       Improved delay routine
Q.OLD       Reduced from 310K to 295K by using overlays
Q.LIB       Added 62CSC command, deleted 62CIU command
CCL.EXE     No longer does * before TSEARCH
DCCAL.BIN   Changed test 11 to 21, added test 11 for 0 volt adjustment
----------- -------------------------------------------------------------------
File        Version 2.23                                          June 23, 1994
----------- -------------------------------------------------------------------
Q.EXE       Improved parameter display formating
Q.EXE       ESC GETSTRING AUXPORT working correctly
CCL.EXE     USERDATA LOG creates log file
CCL.EXE     Accepts many Q commands, eg. WINDOW, COLOR
MUXSRC.BIN  MUX SRC selfcheck, binary, new file
MUXSRC.SYM  MUX SRC selfcheck, symbol table, new file
INSTALL.EXE Makes MUXSRC.OBJ from MUXSRC.BIN
----------- -------------------------------------------------------------------
File        Version 2.22                                          June 14, 1994
----------- -------------------------------------------------------------------
Q.EXE       Relinked to save memory
Q.EXE       ESC S now sets test number to 0
Q.EXE       ESC DOTEST no longer updates test number
Q.EXE       ESC increased delay in FUNTEST TESTSUPPLY
Q.EXE       ESC READY light now on after X and S commands
Q.EXE       ESC now displays opens halt condition reached message
Q.EXE       ESC print detail improved, includes data bin & includes DUT number
Q.EXE       OSTARTn and OSTOPn don't echo command, was broken in 2.10
Q.EXE       RELAY command prints open and close times for relays
CCL.EXE     Makes sure probes are set correctly after USERSKIP,SKIPTO,SKIPLESS
HELP.EXE    Added GOTO, IB, MEASURE ALL, MODEL commands
QTL52.EXE   Added LOAD REPAIR command
CAL62.BIN   Retries BSEARCH in 62PES and 62DVST regular one time after failure
52TSC2.BIN  Tests 721-722 731-732 741-760 771-820 inproved accuracy
52TSC2.BIN  Tests 721-722 731-732 741-760 771-820 removed redundant tests
----------- -------------------------------------------------------------------
File        Version 2.21                                           May 27, 1994
----------- -------------------------------------------------------------------
Q.EXE       ESC SETCHANNEL has less skew between power supplies
----------- -------------------------------------------------------------------
File        Version 2.20                                           May 25, 1994
----------- -------------------------------------------------------------------
Q.EXE       ESC connects PTU local sense FET when last pin is in port 0x34
----------- -------------------------------------------------------------------
File        Version 2.19                                           May 21, 1994
----------- -------------------------------------------------------------------
Q.EXE       Eliminated macro parameter messages during USERSKIP,SKIPTO,SKIPLESS
CCL.EXE     Slopes set correctly after USERSKIP,SKIPTO,SKIPLESS
CCL.EXE     Added DTYPE,DRIVERTOL,STROBETOL commands
----------- -------------------------------------------------------------------
File        Version 2.18                                           May 20, 1994
----------- -------------------------------------------------------------------
Q.EXE       ESC connects local sense FET if PTUCONNECT is done with PINLIST 0
----------- -------------------------------------------------------------------
File        Version 2.17                                           May 20, 1994
----------- -------------------------------------------------------------------
Q.EXE       ESC connects PTU local sense FET after ptuconnect
Q.EXE       ESC connects PTU local sense FET after open power supply test
Q.EXE       ESC connects PTU local sense FET after parallel parametric test
Q.EXE       OLD GETTIME no longer hangs when run from test button
Q.EXE       OLD GETDATE S stores date in string register S in 00/00/00 format
Q.EXE       OLD GETTIME S stores time in string register S in 00:00:00 format
----------- -------------------------------------------------------------------
File        Version 2.16                                           May 17, 1994
----------- -------------------------------------------------------------------
Q.EXE       ESC connects PTU local sense FET after parametric test
Q.EXE       ESC GETDATE S stores date in string register S in 00/00/00 format
Q.EXE       ESC GETTIME S stores time in string register S in 00:00:00 format
Q.EXE       ESC increased power fail detect delay to 300 ms. from 250 ms.
----------- -------------------------------------------------------------------
File        Version 2.15                                            May 9, 1994
----------- -------------------------------------------------------------------
Q.EXE       Added IB command to specify interface board setup parameters
Q.EXE       62PELX,62DVER,62PES,62DVST now working on ESC
Q.EXE       PERIOD measurements on HP5370 are now more accurate
Q.EXE       RESET on HP5370 now working reliably
Q.EXE       OSTARTn and OSTOPn working on ESC
Q.EXE       Fixed ESC BSEARCH on FUNTEST EXQ,TESTSUPPLY or ONLYTESTSUPPLY
QTL.EXE     GETDATE S stores date in string register S in 00/00/00 format
QTL.EXE     GETTIME S stores time in string register S in 00:00:00 format
QTL.EXE     GETDATE S,COMPILE stores compile date in string register S
QTL.EXE     GETTIME S,COMPILE stores compile time in string register S
QTL.EXE     Added LOAD REPAIR command
CCL.EXE     TWEAK command working with ESC
CCL.EXE     SKIPLESS converts nanoseconds to picoseconds
CCL.EXE     Added READY before FDUMP
ESC.EXE     Checks tester data bus more rigorously
HEXBIN.EXE  Works for files over 64K bytes long
----------- -------------------------------------------------------------------
File        Version 2.14                                         April 25, 1994
----------- -------------------------------------------------------------------
Q.EXE       Fixed ESC MEASURE on FUNTEST EXQ,NOERROR
Q.EXE       ESC does not print detail on pass
Q.EXE       Removed race condition from ESC V3
Q.EXE       Added DISCONNECT V3 and DISCONNECT V3_VPAR commands
Q.EXE       Added MODEL and MODEL OLD commands
Q.EXE       CLOCK,RESET,SET are now immediate and SENDPGM does nothing
Q.LIB       Changed 52CSC PELFALL to 6700 picoseconds from 6000 picoseconds
QTL.EXE     Added DISCONNECT V3 and DISCONNECT V3_VPAR commands
CCL.EXE     Fixed problem with labels introduced in version 2.13
CCL.EXE     Added LONG ENHANCED=1 command
CCL.EXE     LOAD no longer loads symbol table
CCL.EXE     Fixed problems with PEM bits
CCL.EXE     TWEAK swaps values if LOWLIMIT is greater than HIGHLIMIT
CCL.EXE     ADJUST WITHIN changes direction if the search is going badly
HELP.EXE    Added 52TSC2 tests 521-526, 52TSC5 test 401
QTL52.EXE   Fixed FUNTEST EXQ,NOERROR
CAL52.BIN   Set VBIAS to -6 volts during PEL and PES deskew procedures
Q8000.BIN   MEASURE works on tests 554-561
62TSC1.BIN  MEASURE works on tests 554-561
52TSC2.BIN  MEASURE works on tests 554-561
52TSC2.BIN  Added tests 521-526 for FUNTEST EXQ,TESTSUPPLY and ONLYTESTSUPPLY
52TSC2.BIN  Doesn't hang on old controller, was broken in 2.13
52TSC5.BIN  Added test 401 for FUNTEST EXQ,NOERROR
----------- -------------------------------------------------------------------
File        Version 2.13                                         April 14, 1994
----------- -------------------------------------------------------------------
Q.EXE       Increased settling time for ESC V1,V2,V3
Q.EXE       Fixed missing minus signs in ESC MEASURE
Q.EXE       Added GOTO command
Q.EXE       Fixed ESC T=
QTL.EXE     Accepts SETPIN n,.. in place of SETPIN PINLIST n,.. ENDLIST
QTL.EXE     Accepts DISCONNECT n,.. in place of DISCONNECT PINLIST n,.. ENDLIST
CCL.EXE     CYCLE, START, STOP use ] commands
CCL.EXE     TWEAK accepts negative numbers
CCL.EXE     Improved message for unrecognizable characters
CCL.EXE     Added USERSKIP, SKIPTO and SKIPLESS commands
TIME.BIN    Added SETCHANNEL V2,V3,VBIAS,VIH1,VIHC,VIL1,VILC,VOH,VOL
CSC40.BIN   LPORTA messages print in hexadecimal instead of signed decimal
CSC40.BIN   Uses TESTNUMBER Q8000 rather than QMODEL=8000
CSC40.BIN   Corrected test limits on tests 903 904 923 924
Q8000.BIN   Added tests 711 712 721 722 731 732 741-754
Q8000.BIN   Removed PARTIME from tests 801-846
52TSC2.BIN  Turns off pin error lights after test 701-820 failure
52TSC3.BIN  Added 1MS to test 404 for HVM to settle
52TSC3.BIN  Tests 375-380 should be working for all types of ECR boards
----------- -------------------------------------------------------------------
File        Version 2.12                                         March 28, 1994
----------- -------------------------------------------------------------------
Q.EXE       ESC SETCHANNEL has new fast algorithm
Q.EXE       Increased number of macros to 512 from 384
Q8000.BIN   Added tests 601-606 611-614 621-624 631-634 701-704 & data bins
52TSC2.BIN  Tests 701-820 display pin numbers
----------- -------------------------------------------------------------------
File        Version 2.11                                          March 8, 1994
----------- -------------------------------------------------------------------
Q.EXE       Works with COM1 & COM3, or with COM2 & COM4, or with three, or four
Q.EXE       ESC fixed MEASURE IV3, OHR, FSTE
EMPTY.EXE   Checks COM3, COM4, LPT1
----------- -------------------------------------------------------------------
File        Version 2.10                                          March 7, 1994
----------- -------------------------------------------------------------------
Q.EXE       QSCHMOO works for small IPAR and +-100 ma IPAR values on Y axis
Q.EXE       Environment variable PCHOST may be used to replace \PCHOST\ path
Q.EXE       START,STOP,OSTART,OSTOP in CCL format work if last character is '.'
Q.EXE       START,STOP,OSTART,OSTOP with "==ps" arguments use ] commands
Q.EXE       ESC PRINT Bn,Wn,Dn now working
Q.EXE       ESC fixed TGSTATUS10-24
Q.EXE       ESC PTG calibration is faster
ESC.EXE     Updated for revision 3 ESC board
----------- -------------------------------------------------------------------
File        Version 2.09                                      February 28, 1994
----------- -------------------------------------------------------------------
Q.EXE       Added PWD command to print working directory
Q.EXE       Increased stack size to 3K from 2K
Q.EXE       ESC disables power supplies upon exit from Q
Q.EXE       ESC FPORTA commands protect system bits
Q.EXE       ESC 52OFST works for TG14
Q.EXE       ESC PARTEST TESTSUPPLY is faster
Q.EXE       ESC fixed problems with B and T
Q.EXE       Added I1 and I2 1 microamp range
QTL.EXE     Added I1 and I2 1 microamp range
QTL.EXE     Added DISCONNECT RESET command to reset errors
HELP.EXE    Added PWD command
52TSC1.BIN  Improved error messages
52TSC2.BIN  Added tests 963-964
52TSC4.BIN  CS or SSS lights all front panel lights
52TSC5.BIN  Skips tests 305 to 308 if there is no DBM
62TSC1.BIN  Added tests 84 to 86
62TSC1.BIN  Test 801 etc. no longer causes test 70 etc. to fail on second pass
INSTALL.EXE Now working correctly, was broken in 2.08
----------- -------------------------------------------------------------------
File        Version 2.08                                      February 18, 1994
----------- -------------------------------------------------------------------
Q.OLD       Non ESCape version of Q.EXE
Q.200       ESCape version of Q.EXE with GT200 driver
Q.EXE       ESC PARCAL correctly compensates for negative currents
Q.EXE       ESC fixed problems with PARTEST PARALLEL, CS, STE, LOAD, BEGIN
Q.EXE       ESC now supports high speed power supply boards
Q.EXE       Vxx commands working for -.001 to -.999 volts, was broken in 2.06
Q.EXE       GT200 PERIOD_START and PERIOD_STOP have improved accuracy
QTL52.EXE   WRITE command now working, PDP-11 compiler produced wrong code
52CAL.LIB   Prompts for jumper when doing chip select strobe calibration
52OFST.BIN  Works with ESCape, except option 1 timing generator 14
52TSC1.BIN  Added tests 63 and 64
62TSC1.BIN  Test 423 restored test at -5 volts
INSTALL.EXE Executes PCHOST.EXE to unzip files
----------- -------------------------------------------------------------------
File        Version 2.07                                       February 2, 1994
----------- -------------------------------------------------------------------
Q.EXE       ESC fixed problems with STE, DSS, MEASURE
Q.EXE       ESC MEASURE ALL displays functional and parametric tests
Q.EXE       ESC added table number to offset table not found message
QTL.EXE     Added TESTNUMBER Q8000 command
DCCAL.BIN   Q2/Q8000 DC calibration program, binary, new file
DCCAL.SYM   Q2/Q8000 DC calibration program, symbol table, new file
52TSC1.BIN  Added tests 979 to 985
52TSC3.BIN  Added tests 101 to 117
INSTALL.EXE Makes DCCAL.OBJ
----------- -------------------------------------------------------------------
File        Version 2.06                                       January 31, 1994
----------- -------------------------------------------------------------------
Q.EXE       ESC DSS and STE work like old controller
Q.EXE       ESC print detail pin numbers displayed correctly
Q.EXE       ESC no longer accepts MEASURE F as MEASURE
Q.EXE       ESC PARTIME works correctly for values 16 to 159
Q.EXE       ESC IV3= now working correctly
Q.EXE       Improved QSCHMOO parameter entry
Q.EXE       VIH displays VIH1 and VIH2
Q.EXE       VIL displays VIL1 and VIL2
Q.EXE       VIH=v sets VIH1 and VIH2
Q.EXE       VIL=v sets VIL1 and VIL2
HELP.EXE    Added VIH, VIL, VIH=v, VIL=v commands
52TSC2.BIN  Added tests 200-316 and 321-342
52TSC3.BIN  Initialized registers used in tests 349-388
62TSC1.BIN  Added tests 731-820
INSTALL.EXE Does not try to make OBJ file if BIN file is not found
----------- -------------------------------------------------------------------
File        Version 2.05                                       January 26, 1994
----------- -------------------------------------------------------------------
Q.EXE       QSCHMOO displays cycle times correctly
Q.EXE       ESC fixed S file, OTIMES, IMAGES, CYCLE, STARTn, STOPn
Q.EXE       Added DOS ATTRIB command
ESC.EXE     Updated for revision 2C ESC board
HELP.EXE    Added DOS ATTRIB command
INSTALL.EXE Makes Q8000.OBJ
52OFST.SYM  New file
52TSC1.SYM  New file
52TSC2.SYM  New file
52TSC3.SYM  New file
52TSC4.SYM  New file
52TSC5.SYM  New file
62TSC1.SYM  New file
62TSC2.SYM  New file
CAL52.SYM   New file
CAL62.SYM   New file
CSC40.SYM   New file
PLOAD.SYM   New file
SPEED.SYM   New file
TIME.SYM    New file
----------- -------------------------------------------------------------------
File        Version 2.04                                       January 20, 1994
----------- -------------------------------------------------------------------
Q.EXE       ESC does interface bins like old controller
Q.EXE       ESC initializes unused arguments in host commands
INSTALL.EXE Makes obj files
----------- -------------------------------------------------------------------
File        Version 2.03                                       January 17, 1994
----------- -------------------------------------------------------------------
Q.EXE       MORE command accepts Q to QUIT
Q.EXE       ESC includes GT200 driver
HELP.EXE    Deleted 52TSC4 test 980
HELP.EXE    Added help for DOS commands
52TSC5.BIN  Works on both 12X 8Y and 11X 9Y 16M Data Buffer Memories
----------- -------------------------------------------------------------------
File        Version 2.02                                       January 14, 1994
----------- -------------------------------------------------------------------
Q.EXE       ESC fixed PTG calibration
62TSC1.BIN  Added tests 461-468 601-634 701-722
----------- -------------------------------------------------------------------
File        Version 2.01                                       January 10, 1994
----------- -------------------------------------------------------------------
Q.EXE       ESC fixed several problems with front panel updates
Q.EXE       ESC no longer shows print detail after pass
52TSC1.BIN  Added tests 61-62
52TSC1.BIN  Test 66 works reliably and displays 66, not 65 on the front panel
52TSC2.BIN  Added tests 961-962
52TSC5.BIN  Works with 11X 9X 16M Data Buffer Memory
62TSC1.BIN  Added tests 80-83 and 87-88
62TSC1.BIN  Tests 702 and 710 no longer fail on some SRC's
62TSC1.BIN  Test 423 removed test at -5 volts
62TSC1.BIN  Uses 62TSC1A.OBJ,62TSC1C.OBJ,62TSC1E.OBJ
62TSC1A.OBJ New file, replaces ZEROS.OBJ
62TSC1C.OBJ New file, replaces RUN001.OBJ
62TSC1E.OBJ New file, replaces SEQ.OBJ
62TSC2.BIN  Uses 62TSC2B.OBJ
62TSC2B.OBJ New file, replaces RUN004.OBJ
INSTALL.EXE Replaces install.bat, installs correctly from drives other than A:
----------- -------------------------------------------------------------------
File        Version 2.00                                        January 3, 1994
----------- -------------------------------------------------------------------
Q.EXE       ESC fixed JSET and JNSET commands
Q.EXE       ESC fixed problem with long X commands
Q.EXE       ESC fixed problem with print detail pin numbers
Q.EXE       ESC DOTEST updates test number on front panel
Q.EXE       ESC PANEL sets scroll window to 6-25 if old window was <= 25 lines
Q.EXE       Eliminated unrecognized data from PEM message
Q.EXE       Symbol table initialized with search registers
Q.EXE       QSCHMOO doesn't write to list file if file open failed
Q.LIB       Changed copyright year to 1994
QTL.EXE     Added DISCONNECT OLD/NEW/SELFTEST commands
QTL.EXE     Added TESTNUMBER ESC command
QTL.EXE     Added SENDPTG command
CCL.EXE     Fixed CLEAR CYCLE MSG OSTARTn OSTOPn START STOP
CCL.EXE     Added OFFSET := START => STOP
ESC.EXE     Added tests for interface board ports 38 39 3B
ESC.EXE     Displays hardware revision
HELP.EXE    Added 62TSC1, 62TSC2 and 52TSC3
52TSC2.BIN  Added tests 721-856
52TSC2.OBJ  Added tests 721-856
----------- -------------------------------------------------------------------
File        Version 1.99                                      December 16, 1993
----------- -------------------------------------------------------------------
Q.EXE       Added UNDOPEM command to undo last PEMBIT or SENDPGM command
Q.EXE       Changed OFFSET and Q register display to improve CCL appearance
Q.EXE       Changed maximum macro size to 2500 from 30000
Q.EXE       ESC CS (Calibrate Step) and SSS (Single Step) commands working
Q.EXE       ESC STE switch updates front panel correctly
Q.EXE       ESC INPUT to string register adds trailing blanks correctly
Q.EXE       ESC XPSTEP works correctly when pattern fails
CCL.EXE     Added ECHO and COLOR commands to improve appearance
HELP.EXE    Added 52TSC2, 52TSC4, 52TSC5
Q8000.BIN   Tests 1-16 working (calibration block)
52TSC2.BIN  Added tests 601-700 and 860-889
52TSC2.OBJ  Added tests 601-700 and 860-889
----------- -------------------------------------------------------------------
File        Version 1.98                                      December 12, 1993
----------- -------------------------------------------------------------------
CCL.EXE     Sets EPSILON to 1
CCL.EXE     TSEARCH moved to just before measurement
CCL.EXE     PEMBIT's for start and stop edge combined into one command
CCL.EXE     Added UNDOPEM commands to undo [...] bits after measurements
HELP.EXE    Added 52TSC1 and UNDOPEM, CLOCK, SET, RESET commands
Q2CAL.LIB   GTTEST,HPTEST display PASSED,FAILED not HPTEST PASSED,FAILED
52TSC2.BIN  Completed tests 501-561
52TSC2.OBJ  Completed tests 501-561
52TSC3.BIN  Added tests 401-427 601-606 701-706 801-802
52TSC3.OBJ  Added tests 401-427 601-606 701-706 801-802
52TSC4.BIN  Deleted unnecessary ENDTEST
52TSC4.OBJ  Deleted unnecessary ENDTEST
52TSC5.BIN  Added tests 801-802
52TSC5.OBJ  Added tests 801-802
62TSC1.BIN  Completed tests 501-561
62TSC1.BIN  Uses 62TSC1B.OBJ, 62TSC1D.OBJ
62TSC1.BIN  Works on old system controller
62TSC1.OBJ  No longer included
62TSC1B.OBJ New file to replace ONES.OBJ ADDBUS.OBJ COLUMN.OBJ BITS.OBJ
62TSC1D.OBJ New file to replace RUN002.OBJ
62TSC2.OBJ  No longer included
----------- -------------------------------------------------------------------
File        Version 1.97                                      November 30, 1993
----------- -------------------------------------------------------------------
Q.EXE       GT200 driver included or not, see version message
Q.EXE       New /OFFSET command performs GT200 probe offset calibration
Q.EXE       Displays one more digit of BSEARCH and LSEARCH values
Q.EXE       Allows most register and macro names that begin with I
Q.EXE       Displays QSCHMOO Y parameter title lines correctly
Q.EXE       ESC PARTEST forces zero volts before connecting PTU to pin
Q2CAL.LIB   New GTTEST macro does HPTEST and /OFFSET
Q8000.BIN   ESC compatible version of Q8000 self check, new program
HELP.EXE    Added /OFFSET, GTTEST, RELAY, BSEARCH, LSEARCH commands
----------- -------------------------------------------------------------------
File        Version 1.96                                      November 24, 1993
----------- -------------------------------------------------------------------
Q.EXE       No GT200 driver in the ESC version
Q.EXE       ESC fixed problem with TRANSFER
Q.EXE       Dummy writes before ESC writes to LPORTA & LPORTB eliminated
Q.LIB       52TSC3 macro no longer sets offsets
QTL.EXE     SETTIME works for TG0
QTL52.EXE   TRANSFER works when LONG is used instead of DOUBLEWORD
Q2CAL.LIB   Eliminated test at .5 volts in HPTEST
CSC40.BIN   Doesn't MEASURE or create CSC40.LST file
CSC40.BIN   Doesn't load symbol table, restores old LB ID
CSC40.BIN   Tests 701,711,721,731,702,712,722,732 changed to  700ua from  600ua
CSC40.BIN   Tests 705,715,725,735,706,716,726,736 changed to  100na from  300na
CSC40.BIN   Tests 707,717,727,737,708,718,728,738 changed to -275mv from -400mv
CSC40.BIN   Tests 709,719,729,739,710,720,730,740 changed to -645mv from -510mv
CSC40.OBJ   Same changes as CSC40.BIN
52TSC1.BIN  Works on old system controller, was broken in 1.94
52TSC2.BIN  Works on old system controller, was broken in 1.94
52TSC3.BIN  Added tests
52TSC3.OBJ  Added tests
----------- -------------------------------------------------------------------
File        Version 1.95                                      November 18, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESC fixed T=, TRANSFER, UNITS TESTED, UNITS PASSED, INPUT
Q.EXE       ESC BSEARCH and LSEARCH are more flexible about parameters
Q.EXE       ESC print register has extra blank like old controller
Q.EXE       ESC PFD and PTD accept lower case input
Q.EXE       ESC uses RELAY command values in OPENPSTEST and PARTEST PARALLEL
Q.EXE       ESC includes GT200 driver
----------- -------------------------------------------------------------------
File        Version 1.94                                      November 15, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESC key no longer exits Q, use control C, EXIT or QUIT
Q.EXE       ESC version no longer prints "Port not found"
Q.EXE       Added RELAY command to specify relay settling times
52TSC1.BIN  Added test 66
52TSC1.OBJ  Added test 66
52TSC5.BIN  Added tests
52TSC5.OBJ  Added tests
----------- -------------------------------------------------------------------
File        Version 1.93                                       November 5, 1993
----------- -------------------------------------------------------------------
Q.EXE       Fixed ESC problems with DBIN, IBIN, CLEARBINS, RESET, MEASURE
Q.EXE       QSCHMOO now works with IPAR on the X axis
52TSC2.BIN  Added tests
52TSC2.OBJ  Added tests
----------- -------------------------------------------------------------------
File        Version 1.92                                       November 3, 1993
----------- -------------------------------------------------------------------
Q.EXE       Updated for revision 2 Q2/62 ESC hardware, initializes QTL space
52TSC2.BIN  Tests 401-406, 501-502, 511-512, 551-553, 701-704, 711-712 working
52TSC2.OBJ  Tests 401-406, 501-502, 511-512, 551-553, 701-704, 711-712 working
62TSC1.BIN  New ESCape compatible version of 62TSC1
62TSC1.OBJ  New ESCape compatible version of 62TSC1
----------- -------------------------------------------------------------------
File        Version 1.91                                       October 27, 1993
----------- -------------------------------------------------------------------
Q.EXE       Updated for revision 2 ESC hardware, will not work on old revisions
Q.EXE       QTL DOS command works for commands like COPY and DIR
Q.EXE       ESC accepts PRM1 (FF), PRM2 (FE) and PRM3 (FD) in PINLIST
Q.EXE       Added GETBYTE and SENDBYTE port commands for ESC self checks
QTL.EXE     Added GETBYTE and SENDBYTE port commands for ESC self checks
QTL.EXE     Doesn't hang when programs are more than 65520 bytes long
ESC.EXE     Updated for revision 2 ESC hardware, will not work on old revisions
EMPTY.EXE   Updated pages tested to match PCX board
52TSC1.BIN  Tests 51 to 60 now working
52TSC1.OBJ  Tests 51 to 60 now working
52TSC2.BIN  Tests 951 to 960 now working
52TSC2.OBJ  Tests 951 to 960 now working
52TSC4.BIN  Eliminated unnecessary code, updated messages
52TSC4.OBJ  Eliminated unnecessary code, updated messages
62TSC2.BIN  Added error message for load board number 1
62TSC2.OBJ  Added error message for load board number 1
----------- -------------------------------------------------------------------
File        Version 1.90                                       October 15, 1993
----------- -------------------------------------------------------------------
Q.EXE       Fixed QSCHMOO Y parameter problems
Q.EXE       ESC no longer waits after STARTTEST to see if power fails
PCQ.EXE     Works without jumper from host console to host tester ports
QTL.EXE     Maximum token length now 512, was reset to 100 in version 1.83
QTL52.EXE   Maximum token length now 512, was reset to 100 in version 1.83
QTL62.EXE   Maximum token length now 512, was reset to 100 in version 1.83
PAT62.EXE   Maximum token length now 512, was reset to 100 in version 1.83
52TSC1.BIN  Added tests 71 and 72
52TSC1.OBJ  Added tests 71 and 72
----------- -------------------------------------------------------------------
File        Version 1.89                                     September 24, 1993
----------- -------------------------------------------------------------------
Q.EXE       Fixed ESC QSCHMOO, PARTEST <10na <0v
52TSC3.BIN  New ESCape compatible version of 52TSC3
52TSC3.OBJ  New ESCape compatible version of 52TSC3
----------- -------------------------------------------------------------------
File        Version 1.88                                     September 20, 1993
----------- -------------------------------------------------------------------
52TSC1.BIN  New ESCape compatible version of 52TSC1
52TSC1.OBJ  New ESCape compatible version of 52TSC1
52TSC2.BIN  New ESCape compatible version of 52TSC2
52TSC2.OBJ  New ESCape compatible version of 52TSC2
52TSC5.BIN  New ESCape compatible version of 52TSC5
52TSC5.OBJ  New ESCape compatible version of 52TSC5
----------- -------------------------------------------------------------------
File        Version 1.87                                     September 17, 1993
----------- -------------------------------------------------------------------
Q.EXE       Reduced symbol table size to 1024 from 1280 to save memory
Q.EXE       Reduced number of macros to 384 from 512 to save memory
Q.EXE       ESC version does not support GT200
----------- -------------------------------------------------------------------
File        Version 1.86                                     September 12, 1993
----------- -------------------------------------------------------------------
Q.LIB       52CSC delays for PEL and PES tweaked
QTL.EXE     Added POBSELFCHECK command
QTL52.EXE   Added AUTOSTEP, OSCHECKSUM, PESTST, RAMCHECK, ROWCOL commands
QTL52.EXE   Added SDATA, SDTOPO, SLFNUM, SLFSTP, SERCAT, SINGLE commands
QTL52.EXE   Added SSCRAM, STESTA, STESTB, STOPO, SURAMS commands
QTL52.EXE   Added PGOFFSET a,COLUMN,NOERROR
QTL52.EXE   Added PGOFFSET a,COLUMN,COUNT,NOERROR
QTL52.EXE   Added PGOFFSET a,ROW,NOERROR
QTL52.EXE   Added PGOFFSET a,ROW,COLUMN,NOERROR
QTL52.EXE   Added PGOFFSET a,ROW,COUNT,NOERROR
PLOAD.BIN   Q2/62 pattern load & save diagnostic, new program, binary
PLOAD.OBJ   Q2/62 pattern load & save diagnostic, new program, hexadecimal
HEXBIN.EXE  Writes error messages to stdout rather than stderr
52OFST.BIN  Now working, 1.84 versions were broken
52OFST.OBJ  Now working, 1.84 versions were broken
----------- -------------------------------------------------------------------
File        Version 1.85                                      September 1, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESC fixed PTG timing data, S file, measure to LST file, QSCHMOO
Q.EXE       ESC fixed breakpoint reset, front panel reset
Q.EXE       Uses HELP.EXE rather than help macros
Q.LIB       Help macros removed to conserve memory
Q.LIB       Added 52CSC macro to load CSC40 calibration macros
Q.LIB       Added CSC40 macro to load and execute CSC40 self check
Q2CAL.LIB   52PEL and 52DVER use PELFALL and PELRISE variables not DELAY
HELP.EXE    New program
TIME.BIN    New and improved
TIME.OBJ    New and improved
TIME.SYM    New file
CSC40.BIN   New and improved
CSC40.OBJ   New and improved
CSC40.SYM   New file
----------- -------------------------------------------------------------------
File        Version 1.84                                        August 23, 1993
----------- -------------------------------------------------------------------
52CAL.LIB   52OFST generates OSTART14 and OSTOP14 when option 1 is selected
52OFST.BIN  Q2/52 offset calibration QTL, new program, binary
52OFST.OBJ  Q2/52 offset calibration QTL, new program, binary
----------- -------------------------------------------------------------------
File        Version 1.83                                        August 16, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESC fixed LPORT, OPENPSTEST, PARTEST, SETCHANNEL
TIME.BIN    New program that measures individual instruction execution times
TIME.OBJ    New program that measures individual instruction execution times
SPEED.BIN   Improved testing of registers
SPEED.OBJ   Improved testing of registers
----------- -------------------------------------------------------------------
File        Version 1.82                                         August 2, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESC fixed PTD, TDUMP, WAFER MAP
SPEED.BIN   Improved testing of expressions
SPEED.OBJ   Improved testing of expressions
----------- -------------------------------------------------------------------
File        Version 1.81                                          July 24, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESC fixed PFD, ENDTEST, PARTEST PARALLEL, CALL, RETURN
Q.EXE       Variables now work that begin with #, TGn, STARTn, STOPn
Q.EXE       OSTARTn and OSTOPn display value of start and stop offsets
CCL.EXE     Displays registers and offsets after assigment of new values
CCL.EXE     MID now working correctly
ESC.EXE     Improved fault coverage
QTL.EXE     Strings in the form "..." now working correctly
QTL52.EXE   Only accepts : as 2nd letter in identifier so label:statement works
----------- -------------------------------------------------------------------
File        Version 1.80                                          July 13, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape fixed DSS, STE, PD, S, R, B, Q8000 etc.
ESC.EXE     Improved fault coverage
----------- -------------------------------------------------------------------
File        Version 1.79                                           July 6, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape fixed Handler/Prober port, BSEARCH, LSEARCH, DOSUMMARY, CREG
ESC.EXE     Updated for revision 1 ESC board
----------- -------------------------------------------------------------------
File        Version 1.78                                          June 28, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape PARTEST's are faster and are reliable
Q.EXE       PLOAD's work even if memory mapped I/O is disabled, but are slow
CSC40.BIN   Removed unnecessary LOADBOARD commands
CSC40.OBJ   Removed unnecessary LOADBOARD commands
SPEED.BIN   Improved operation and removed ready block
SPEED.OBJ   Improved operation and removed ready block
----------- -------------------------------------------------------------------
File        Version 1.77                                          June 19, 1993
----------- -------------------------------------------------------------------
CAL52.BIN   52PES and 52DVST now work with calibration load board
CAL52.OBJ   52PES and 52DVST now work with calibration load board
62MUX.LIB   62PELX and 62PES save data to files 62DVER.DAT and 62DVST.DAT
62REG.LIB   62PELX and 62PES save data to files 62DVER.DAT and 62DVST.DAT
ESC.EXE     Increased I/O read set-up time
Q.LIB       Updated HELP HP5370
----------- -------------------------------------------------------------------
File        Version 1.76                                          June 15, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape fixed SFLAG RETURN, IBIN0, VOUT, I/O READ, PARTEST
Q.EXE       Delay increased in routine that reads OSTARTn and OSTOPn to 300 ms.
Q.EXE       Delay at end of online commands increased to 250 ms. from 120 ms.
CCL.EXE     END command now works correctly
ESC.EXE     Increased I/O read set-up time
----------- -------------------------------------------------------------------
File        Version 1.75                                           June 7, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape fixed problems with READY BLOCK, CLOSE LST, DUMP FILE
----------- -------------------------------------------------------------------
File        Version 1.74                                           June 3, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape fixed problems with PLOAD, BSEARCH, AUXPORT, WPORT
Q.EXE       TT (Test Time) command handles case of zero hundredths correctly
QTL.EXE     Recompiled to reduce memory use and execution time
QTL52.EXE   Recompiled to reduce memory use and execution time
QTL62.EXE   Recompiled to reduce memory use and execution time
PAT62.EXE   Recompiled to reduce memory use and execution time
----------- -------------------------------------------------------------------
File        Version 1.73                                           May 27, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape works with Q2/62
QTL52.EXE   Handles INCLUDE's with : in the file name
----------- -------------------------------------------------------------------
File        Version 1.72                                           May 21, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape software improved
Q.EXE       Added PDPPATH command, defines path to replace DK:, DL0: etc.
Q.EXE       Added GETTIME command, to get time to double word register
CCL.EXE     Recompiled to reduce executable size
ESC.EXE     Improved fault coverage, sets power supplies to zero
QTL.EXE     Added GETTIME command, to get time to double word register
QTL.EXE     Handles INCLUDE file names with <> quotes around them
QTL52.EXE   Handles INCLUDE's with \ in the file name
QTL52.EXE   Prints the file name in the INCLUDE file not found message
CSC40.BIN   Added tests 501 to 580 to test relays for opens
CSC40.OBJ   Added tests 501 to 580 to test relays for opens
----------- -------------------------------------------------------------------
File        Version 1.71                                            May 7, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape software improved
ESC.EXE     Tests one or none of the 6 supported COM ports
HEXBIN.EXE  Reduced symbol table to 2048 entries from 4096
----------- -------------------------------------------------------------------
File        Version 1.70                                            May 5, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape software improved
Q.EXE       WAFER command working correctly
CCL.EXE     Declares register that gets cycle time measurement
SPEED.BIN   System control speed diagnostic, new program
SPEED.OBJ   System control speed diagnostic, new program
HEXBIN.EXE  Uses less memory
----------- -------------------------------------------------------------------
File        Version 1.69                                         April 28, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape software improved
62MUX.LIB   Corrected 62DVER rising edge to 52 nanoseconds, was broken in 1.58
----------- -------------------------------------------------------------------
File        Version 1.68                                         April 23, 1993
----------- -------------------------------------------------------------------
Q.EXE       TT (Test Time) command resolution improved to 1/100 of a second
Q.EXE       Extra CR and BS characters eliminated from LOG file
Q.EXE       Writes TAB not BLANK characters to LOG file
Q.EXE       QSCHMOO works when test has a PLOAD in it
Q.EXE       Symbol table size reduced to 1280 entries from 1536
QTL62.EXE   Handles % characters properly
----------- -------------------------------------------------------------------
File        Version 1.67                                         April 14, 1993
----------- -------------------------------------------------------------------
Q.EXE       CLS works with console in 50 line mode
Q.EXE       Accepts MODE command, eg. "MODE CON LINES=50"
Q.EXE       PRINT works with more file names
Q.EXE       STARTn, STOPn, OSTARTn, OSTOPn, Vx, Ix may be used in expressions
QTL.EXE     Accepts LONG in place of DOUBLEWORD
QTL.EXE     Accepts SETLEVEL in place of SETCHANNEL
QTL.EXE     Maximum number of DOUBLEWORD registers increased to 234 from 224.
CCL.EXE     Accepts FLOAD and OFFSET commands
CCL.EXE     TIMES and OTIMES accept multiple arguments
CCL.EXE     No longer creates OSTARTn and OSTOPn registers
52CAL.LIB   Changed variable MODE to WAY
62MUX.LIB   Changed variable MODE to WAY
62REG.LIB   Changed variable MODE to WAY
CAL52.BIN   Changed variable MODE to WAY
CAL52.OBJ   Changed variable MODE to WAY
CAL62.BIN   Changed variable MODE to WAY
CAL62.OBJ   Changed variable MODE to WAY
CSC40.BIN   Added 75NA leakage tests 101 to 126
CSC40.OBJ   Added 75NA leakage tests 101 to 126
----------- -------------------------------------------------------------------
File        Version 1.66                                         March 31, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape software improved
Q.EXE       WAFER command has Y axis flipped and plots 2 digit decimal bins
PCQ.EXE     Reports CTS failures as errors, not warnings
----------- -------------------------------------------------------------------
File        Version 1.65                                         March 10, 1993
----------- -------------------------------------------------------------------
Q.EXE       Maximum number of macros increased to 512 from 256
QTL.EXE     CYCLE,START,STOP,BASE,EARLY,LATE,DELAY,OSTART,OSTOP take t+t+t
QTL.EXE     CYCLE,START,STOP,BASE,EARLY,LATE,DELAY,OSTART,OSTOP take t+t-t
CAL52.BIN   Includes PTG calibration and PTG verify
CAL52.OBJ   Includes PTG calibration and PTG verify
52CAL.LIB   Uses CAL52 instead of 52PCAL
PAT62.EXE   Undefined bits in SET F & SET FC default to previous vector
CSC40.BIN   CSC40 Load Board diagnostic, binary, new program
CSC40.OBJ   CSC40 Load Board diagnostic, hexadecimal, new program
62TSC2A.OBJ 62TSC2 pattern file, replaces requirement for RUN003.OBJ
----------- -------------------------------------------------------------------
File        Version 1.64                                      February 24, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape software improved
Q.EXE       Symbol table uses less memory
ESC.EXE     ESCape hardware diagnostic, new program
QTL52.EXE   Initial conditions work inside INSERT USER, was broken in 1.62
----------- -------------------------------------------------------------------
File        Version 1.63                                      February 12, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape software improved
Q.EXE       CYCLE command added to display cycle time
Q.EXE       WAFER command added to draw wafer map on screen
QTL.EXE     CYCLE,START,STOP,BASE,EARLY,LATE,DELAY,OSTART,OSTOP take time+time
----------- -------------------------------------------------------------------
File        Version 1.62                                       February 4, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape software improved
Q.EXE       TT (Test Time) command added
QTL52.EXE   Accepts initial conditions after INSERT PROGRAM
52CAL.LIB   CAL52 used instead of 52XPES
----------- -------------------------------------------------------------------
File        Version 1.61                                       February 1, 1993
----------- -------------------------------------------------------------------
Q.EXE       ESCape software improved
QTL.EXE     ADDCOM,ERRORCOM,FORCEERROR,LOOPCOM,PIPECOM,PORTCOM  commands added
QTL.EXE     PORTSEND,RESETERROR,SCKCOM,SCKSEND,SELFNUM,SELFSTEP commands added
62TSC2.BIN  New ESCape compatible version of 62TSC2
62TSC2.OBJ  New ESCape compatible version of 62TSC2
----------- -------------------------------------------------------------------
File        Version 1.60                                       January 26, 1993
----------- -------------------------------------------------------------------
Q.EXE       BEGIN,SUMMARY,DETAIL,PGM messages are logged to an open DAT file
QTL.EXE     No longer accepts strange forms of DATABIN and INTBIN
52TSC4.BIN  New ESCape compatible version of 52TSC4
52TSC4.OBJ  New ESCape compatible version of 52TSC4
----------- -------------------------------------------------------------------
File        Version 1.59                                       January 25, 1993
----------- -------------------------------------------------------------------
PCHOST.REV  Replaces Q.REV and QTL.REV
Q.EXE       BEGIN,SUMMARY,DETAIL,PGM messages are logged to an open LST file
Q.EXE       SUM command added to calculate checksum of a file
Q.EXE       POB LED's are now POWER,-POB,READ,POB was POWER,Q,PLOAD,OFF
QTL.EXE     CALL,CASE,JNSET,JSET,JUMP,MACRO,SKIPTO now accept integer labels
QTL.EXE     Supports ESCape Hardware Key
QTL52.EXE   Supports ESCape Hardware Key
QTL62.EXE   Supports ESCape Hardware Key
PAT62.EXE   Supports ESCape Hardware Key
----------- -------------------------------------------------------------------
File        Version 1.58                                        January 8, 1993
----------- -------------------------------------------------------------------
Q.EXE       Wafer map data written to open DAT file
Q.EXE       62PELX, 62DVER in 62MUX use DELAY variable
Q.EXE       QSCHMOO/OK command added
Q.EXE       62PES in 62REG working again, was broken in revision 1.55
Q.EXE       62PELX, 62DVER, 62PES, 62DVST in 62REG have improved messages
Q.EXE       Tester online command delay increased to 120 ms. from 50 ms.
Q.EXE       Tester output command delay increased to 120 ms. from 40 ms.
HEXBIN.EXE  Maximum file size increased TO 65520 from 60000
POB.EXE     Now tests some control signals
----------- -------------------------------------------------------------------
File        Version 1.57                                      December 18, 1992
----------- -------------------------------------------------------------------
Q.EXE       "r" accepted in place of "PRINTR r"
Q.EXE       CALL/NOERROR command added
Q.EXE       Q.BAT no longer needs ECHO in it
Q.EXE       CAL52 replaces 52XPEL and 52PEL
Q.EXE       52PES1,52PES2,52DVST1,52DVST3 use T= instead of TEST
Q.EXE       Eliminated extra carriage returns in DAT and LST files
Q.EXE       Deskew verify specification is now relative not absolute
Q.EXE       Tester messages accepted while executing batch files
Q.EXE       LPP delay increased from 1700us to 2200us
Q.EXE       62MUX works with CSC40 load board
QTL.EXE     I3 n,iUA now working
----------- -------------------------------------------------------------------
File        Version 1.56                                      December 18, 1992
----------- -------------------------------------------------------------------
Q.EXE       CSC40 calibration load board ID is now 04, was 0C
Q.EXE       HPTEST works with CSC40 load board
Q.EXE       PERIOD_START and PERIOD_STOP variables added
Q.EXE       PLOAD generates file not found message
CCL.EXE     Unnecessary attach START & STOP messages eliminated
CCL.EXE     Unnecessary SLSTART & SLSTOP messages eliminated
CCL.EXE     Improved handling of OSTART and OSTOP
CCL.EXE     ADJUST .. WITHIN .. BY MOVING .. now working
CCL.EXE     Supports period measurements
----------- -------------------------------------------------------------------
File        Version 1.55                                      November 11, 1992
----------- -------------------------------------------------------------------
Q.EXE       Self check macros use LOG file rather than SCREEN command
Q.EXE       Self check macros set LPORTA and LPORTB for CSC40 load board
Q.EXE       52TSC command runs 52TSC1 - 52TSC5 with CSC40 load board
Q.EXE       62TSC command runs 62TSC1 & 62TSC2 with CSC40 load board
Q.EXE       52TSC3, 52TSC123, 52TSC initialize offsets
Q.EXE       52PEL1, 52PEL3, 52DVER1, 52DVER3 work with CSC40 load board
Q.EXE       52PES1, 52PES3, 52DVST1, 52DVST3 work with CSC40 load board
Q.EXE       62PELX, 62PES in 62REG works with CSC40, only one probe to move
Q.EXE       62MCAL, 62MVER et. al. in 62REG work with CSC40 load board
Q.EXE       SLOPE, SLSTART, SLSTOP work with flipped probes
Q.EXE       PROBE command with GT200 no longer reversed
Q.EXE       WAIT, PROBE, ADJUST, VERIFY abort macro if ^C is typed
Q.EXE       52VER1 runs 52DVER1, 52DVST1 and 52MVER
Q.EXE       52VER3 runs 52DVER3, 52DVST3 and 52MVER




 


2001 Skyline Test Equipment